Shop now
Information |
||
|---|---|---|
| PD No. | VT-LT3-PLU24200-4 | |
| PD Line | VT-LT3 Series | |
| Input Voltage | 100-240VAC 50/60Hz | |
| Channels | 4 | |
| Output |
48V 25A(instantaneous value) 200W(Total Power) |
|
| Drive Mode | Constant voltage Stroboscopic | |
| Light Mode | Pulse width modulation(PWM) | |
| Trigger Delay | ≤ 5us | |
| External Trigger Voltage | DC12-24V 10mA(response to edge signal) , high-speed optocoupler isolation input, with current limiting resistor | |
| Pulse Width Time | 000-999us | |
| Internal Trigger Cycle | 010ms-999ms | |
| Trigger Camera Output |
DC12V 20mA (Rising edge) Port type: logic gate output, high level 12V, low level 0V |
|
| Output Port | SMP-03V-BC(1:Output + 2:NC 3:Output-) | |
| Telecommunication | RS232(DB9)、Ethernet(RJ45) | |
| Environment |
Operating Environment: 0-40℃ , Humidity:20~85%RH(non-condensation) Storage Temperature: -20-60℃ , Humidity:20~85%RH(non-condensation) |
|
| Cooling Mode | Forced cooling（Built-in fan） | |
E-mail: 
Manufacturing Center: